
USB PROGRAMMING TOOL
USB programmer for PC setting of different EMIP series encoder parameters. The simple and intuitive PC interface and USB power supply allow a quick setup. Supported operating systems are Windows 7, 8.1, 10, 11. PC SW can be downloaded from here.UPT-001

AAM 36
Magnetic multiturn absolute AAM 36 (ø 36 mm) encoder series. The multiturn counting is developed with an innovative self-powered Energy Harvesting Technology, based on the Wiegand system, so the encoder doesn't need gears nor batteries. AAM 36 is a high-resolution, extremely sturdy (separated chambers), compact and versatile solution, easy to setup thanks to CANopen interface. AAM36
External diameter (max) | 36 mm |
Shaft diameter (max) | 10 mm |
Resolution (max) | 14 bit ST / 24 bit MT |
Output frequency (max) | 10 kBaud ... 1 Mbaud |
Operating temperature (°C) | -40° ... +85° |
Enclosure rating | IP 67 / IP 65 |
Linearity | ± 0,35° |
Download the file
Download
EX 80
Flameproof EX 80 (ø 80 mm) incremental encoders series for applications within explosive and hazardous areas (ATEX certified). EX80
External diameter (max) | 80 mm |
Shaft diameter (max) | 10 mm |
Resolution (max) | 10.000 ppr |
Output frequency (max) | 500 kHz |
Operating temperature (°C) | -20 ... +50 |
Enclosure rating | IP 65 |
Download the file
Download
EL 49
The EL49 rotary encoder series (ø 49 mm) is recommended in feedback control systems on AC servomotors.
· 3 channel encoder (A / B / Z) up to 2048 ppr
· Power supply up to +24 V DC with several electrical interfaces available
· Up to 150kHz of output frequency
· Cable output, connector available on cable end
· Through hollow shaft diameter up to 12,7 mm (1/2”)
· Interchangeable with size 19 Resolver
External diameter (max) | 49 mm |
Shaft diameter (max) | 12,7 mm |
Resolution (max) | 2.048 ppr |
Output frequency (max) | 150 kHz |
Operating temperature (°C) | -10 ... +100 |
Enclosure rating | IP 40 |

Adapter Signal Splitter
This EMB / EMBO board is used when it's necessary to adapt the encoder electronic features to control devices connected among them. Main functions of the EMB / EMBO are output signal splitting, adaption of output stages and optically isolation of inputs. It can be employed in a large number of applications and solve a wide range of problems: please check the ordering code for further information.