BMAA - Absolute magnetic band

Magnetic band for TMAA sensor.

EAR 58 - 63 Bit Parallel / SSI

EAR 58-63 F / G - Bit Parallel / SSI - Blind hollow shaft

Blind hollow shaft EAR 58 - EAR 63 (ø 58-63 mm) series of optical singleturn absolute encoders, with Bit parallel or SSI electronics. This series is designed for applications that require excellent accuracy, even in extended linear displacements, as well as mechanical and electronic features that ensure a great performance also in the most difficult environments. EAR58 EAR63

External diameter (max) 63 mm
Shaft diameter (max) 15 mm
Resolution (max) 25 bit
Output frequency (max) 50 kHz (Par.) / 1 MHz (SSI)
Operating temperature (°C) -40° ... +85°C (-40° ... +185°F)
Enclosure rating IP 67

Download the file



USB Programming Tool

USB programmer for PC setting of different EMIP series encoder parameters. The simple and intuitive PC interface and USB power supply allow a quick setup. Supported operating systems are Windows 7, 8.1, 10, 11. PC SW can be downloaded from here.UPT-001

EMI 55

EMI 55

EMI 55 A

Product replaced with updated model EMI 55 M.

PCN notification.

The EMI 55 (ø 55 mm) magnetic incremental encoder series, due to its elevated IP sealing and its high operating speed, is suitable for several application fields like electric motors, marine industry, iron and steel industry, textile machines, wood, paper, glass, marble working machinery and, more generally, automation and process control fields. Models with anodized flanges are available.  EMI55

External diameter (max) 55 mm
Shaft diameter (max) 10 mm
Resolution (max) 2.048 ppr
Output frequency (max) 205 kHz
Operating temperature (°C) -25 ... +85
Enclosure rating IP 67
Encoder signal selector

Encoder signal selector


Not for new design, EOL notification.

The EMD board is used whenever it's necessary to carry out a selected signal among a maximum of three inputs. This board accepts, as input, signals coming from a maximum of three encoders and supplies, in output, the signals of one of these, selected electronically. The output signal is selected by properly supplying the two inputs, IN1 and IN2, according to the working diagram (please see datasheet). The type of output and encoder to be connected must be described in the ordering code, on the condition that all the electronic types connected encoders have to be the same. Moreover, the EMD supplies three contacts, normally open, which are switched off when the correspondent input is selected.